Homer Nine & Sons, Inc., Air Conditioner repair serive company in Beaver Falls PA
Check out our facebook for more Air Conditioning repair service info in Aliquippa PA
Find us on google for our great AC repair service reviews in Beaver Falls PA
Email us any AC repair questions from Beaver PA
 
Toll Free (800) 834-NINE
Local (724) 774-4405
Homer Nine & Sons, Inc., AC repair service company in Beaver PA
Check out our facebook for more AC repair service info in Beaver Falls PA Find us on Google for our great Air Conditioning repair service reviews in Beaver Falls PA Email us any Air Conditioner repair questions from Beaver PA

Toll Free (800) 834-NINE
Local (724) 774-4405

Installing an Insulation Blanket on an Electric Water Heater

Note: Installation is more difficult on gas and oil-fired heaters. Ask a qualified HVAC contractor for instructions.

  1. Cut the tank top insulation to fit around the piping in the top of the tank. Tape the cut section closed after the top has been installed.
  2. Fold the corners of the tank top insulation down and tape to the sides of the tank.
  3. Position the insulating blanket around the circumference of the tank. For ease of installation, position the blanket so that the ends do not come together over the access panels in the side of the tank. Some tanks have only one access panel.
  4. Secure the blanket in place with the belts provided. Position the belts so they do not go over the access panels (Figure 2). Belts should fit snugly over the blanket but not compress it more than 15% to 20% of its thickness. The installation is easier with two people. If working alone, use tape to hold the blanket to the top until you get the belts into position.
  5. If your water heater has the temperature/ pressure relief valve and the overflow pipe on the side of the tank instead of on the top, install the blanket so these items are outside of the blanket. Depending on the piping arrangement and location, you may need to compress, or even cut, the blanket.
  6. Locate the four corners of the access panel(s). Make an x-shaped cut in the insulating blanket from corner to corner of each access panel.
  7. Fold the triangular flaps produced by the cuts underneath the insulating blanket. Repeat steps 6 and 7 for the rating/ instruction plate.
  8. The blanket must not be installed on a leaking tank.

© Online-Access

24 Hour Emergency Service • Call Us Today • (724) 774-4405 • OR • Fill Out Our Online Form
Location
We service most AC brands and models near Beaver PA.
Business Address:
415 Mulberry Street
Beaver, PA 15009
Contact Us
Schedule your Air Conditioning replacement in Aliquippa PA.
Company Phone:
Phone: (724) 774-4405
We offer 24/7 emergency Air Conditioner repair service in Beaver PA.
Office Hours:
Monday- Friday 8am-5pm
24 Hr Emergency Service
For your AC repair in Beaver PA, trust a licensed, certified contractor.
License:
PA PA005633